How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a distinct set of steps to take to add the second key. It requires dealer service with a handheld computer called Tech-2. Then a new car key and transponder have to be purchased and then programmed into the car.
It is a good idea to rotate your keys so that one does not get worn out more quickly than the other. This will also help to keep your keys in good condition.
Replacement Case
The new key fobs do not look like the older Saab keys. They're equipped with electronic devices that make them difficult to duplicate. That has made car theft a lot more complicated than it was 20 years ago. It also makes it more expensive to replace keys lost.
Every owner of a 9-3 Saab should have at a minimum two functioning keys. It's expensive to replace a lost key because it requires replacing the CIM module, as well as changing the locking cylinders. Dealers charge between $100 and $200 to do this.
There are ways to reduce these high costs. Certain parts suppliers will utilize the code of the spare key to cut a brand new metal blade for less than what the dealer charges. The key must, however, be the same as the original in order to function in your car.
You can also change the case yourself by following these steps. saab replacement key 'll need a flathead and patience. With the screwdriver, break off the plastic and then remove the emergency key. Once you have the case open, take the electronics out and put them in your new case. Make sure you insert the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a budget component that can be easily and quickly replaced. Cyclone's YouTube video Cyd demonstrates the procedure for replacing the remote fob battery with just four easy steps. This tutorial can be used with any modern Saab key fob. However, the procedure may differ slightly.
This button is usually located next to the Saab logo on the back of the fob. This button is usually on the back of the fob close to the Saab Logo. Then take an screwdriver with a flat head to insert into the tiny hole in this button. This should be enough to allow you to open the fob case to allow you to change the battery.
After you have installed the batteries CR1632, you can reassemble the remote key fob. You can then program it into your car. The whole process should take more than an hour at most. This is a simple procedure that doesn't require special tools.
If you lose a key, the process is a bit more involved however it can be done. The dealer must first read the VIN of the vehicle, and then purchase the replacement TWICE module as well as key blade with the correct unique code. The dealer will then have to program the key using MDI, a new software tool.
Key Replacement Fob
The key fob is the device that locks and unlocks your car. It is equipped with batteries inside. Batteries have a finite lifespan and eventually will die. This is a typical issue that affects all cars and the good news is that you can change the batteries in most key fobs and not have to replace the entire case. Amazon sells replacement fobs with all the electronics installed. It is easy to remove the case and replace the batteries. It is important to remember that you will need to remove the emergency key first. you can accomplish this by inserting the small screwdriver flathead into the slot that is located in the middle of the case. The case should split when you move the screwdriver around it.
If you're ready to change your keys, keep a spare on hand. This will save you lots of money. If you have an extra key, ask the dealer to cut it and program it to your vehicle. This is a lot less expensive than purchasing a new fob.
If you don't have a spare, it is possible to add another key to your car, but this requires a lot research and effort. Adding a second key costs several hundred dollars and it requires programming of the car's computer. This can be done by a professional, however it's a costly option for most owners.
Replacement Ignition
In contrast to the earlier Saab cars, the modern SAAB 9-3 models feature an extremely sophisticated alarm system that is dependent on a coded keys. If you lose your only key, it could be costly to get another one since the car must have a special computer added and be programmed to accept a brand new key. Even dealers can charge hundreds of dollars to program an additional key when they are not able to do it.
If you've lost the only working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make the replacement, and will charge you the highest price for it. Instead we can reprogram the EEPROM on your existing car computer to make it ready for a replacement key, and save you over 50% of the amount you spend at a dealer.
If you have owned a SAAB 9-3 an extended period of time and you're aware of the ignition keys aren't very durable. They can get extremely sticky, and the buttons can be removed from them occasionally and you should think about getting a replacement if yours isn't performing as it should. It's not as difficult as you think to replace the ignition key. With the proper tools, it can be accomplished in a matter of minutes.